En 3-axlig fräs ifrån Amerikanska Haas Automation. Just VF2SS har blivit lite av en standardmaskin för oss på Claesson Engineering AB. Det är en snabb, flexibel och mycket lättställd maskin som är perfekt för mindre produktionsserier. Våra maskiner är utrustade med Renishaw mätprob-system som gör att vi kan mäta bitarna direkt i maskinen och automatiskt justera ev. toleranser automatiskt.
VF-2SS | ||
TRAVELS | S.A.E. | METRIC |
---|---|---|
X Axis | 30 " | 762 mm |
Y Axis | 16 " | 406 mm |
Z Axis | 20 " | 508 mm |
Spindle Nose to Table (~ max) | 24 " | 610 mm |
Spindle Nose to Table (~ min) | 4 " | 102 mm |
TABLE | S.A.E. | METRIC |
Length | 36 " | 914 mm |
Width | 14 " | 356 mm |
T-Slot Width | 5/8 " | 16 mm |
T-Slot Center Distance | 4.92 " | 125.0 mm |
Number of Std T-Slots | 3 | 3 |
Max Weight on Table (evenly distributed) | 1500 lb | 680 kg |
SPINDLE | S.A.E. | METRIC |
Max Rating | 30 hp | 22.4 kW |
Max Speed | 12000 rpm | 12000 rpm |
Max Torque | 90 ft-lb @ 2000 rpm | 122 Nm @ 2000 rpm |
Drive System | Inline Direct-Drive | Inline Direct-Drive |
Taper | CT or BT 40 | CT or BT 40 |
Bearing Lubrication | Air/Oil Injection | Air/Oil Injection |
Cooling | Liquid Cooled | Liquid Cooled |
FEEDRATES | S.A.E. | METRIC |
Rapids on X | 1400 in/min | 35.6 m/min |
Rapids on Y | 1400 in/min | 35.6 m/min |
Rapids on Z | 1400 in/min | 35.6 m/min |
Max Cutting | 833 in/min | 21.2 m/min |
AXIS MOTORS | S.A.E. | METRIC |
Max Thrust X | 1995 lb | 8874 N |
Max Thrust Y | 1995 lb | 8874 N |
Max Thrust Z | 3085 lb | 13723 N |
TOOL CHANGER | S.A.E. | METRIC |
Type | SMTC | SMTC |
Capacity | 24+1 | 24+1 |
Max Tool Diameter (adjacent empty) | 5 " | 127 mm |
Max Tool Diameter (full) | 3 " | 76 mm |
Max Tool Length (from gage line) | 11 " | 279 mm |
Max Tool Weight | 12 lb | 5 kg |
Tool-to-Tool (avg) | 1.6 sec | 1.6 sec |
Chip-to-Chip (avg) | 2.2 sec | 2.2 sec |
GENERAL | S.A.E. | METRIC |
Air Required | 4 scfm, 100 psi | 113 L/min, 6.9 bar |
Coolant Capacity | 55 gal | 208 L |